• Please specify the product's required option(s).

GUSTARD A20H HIFI DAC/Headphone Amplifier/Double AK4497EQ/XMOS DSD256 384Khz

US$836.98

Available

US$836.98

Buyer Protection

100% safe shopping experience of every customer, 30-day unconditional money-back guarantee!
Genuine Product
Safer Shopping
30 Days Money Back

Product Details

Driver and User Guide: https://download.shenzhenaudio.com/Gustard/Gustard%20A20H/A20H-ALL.zip

Mac OS X 10.6.4 and above don't need to install the driver

 

 
 
• The latest top-level decoding chip AKM AK4497EQ x2,left/right channel independent, isolated interference,the sound is more pure;
• CPLD programmable logic chip,the logic of its own construction of digital integrated circuits,clock management,2nd PLL digital shaping,DOP demodulation,PCM/DSD depop switch exclusive technology.For excellent sound quality and laid a solid foundation;
• Full Discrete Component High Current Pure Class A balanced headphone amplifier,each channel uses two independent amplification units to form a symmetrical output line,single-ended and balanced output at the same time,providing an excellent listening platform for the majority of headphone lovers;
• Native fully balanced architecture,from DA to the amplifier circuit,without any conversion,the full four-way output volume;
• DAC and headphone amplifiers each use a custom 50W audio dedicated toroidal transformer,fully independent power supply.
• Analog LPF circuit using independent development of discrete lines,carefully adjust the parameters of each level,until the best working condition;
• High/low selectable gain in preamp mode.Supports 60 analog lossless volume adjustment.Remote control with the post-amplifier,active speaker;can also turn off the pre-function,DA line straight out.RCA single-ended and XLR balanced output at the same time;
• A20H use Native full-balanced design,from decoding to volume control,including the amp section are fully balanced design.
• Full interface support DSD hardware decode:IIS supports DSD64,DSD128,DSD256,DSD512;

SPDIF,Optical,AES/EBU support DSD64(DOP mode);

USB support DSD64,DSD128,DSD256;
• Digital filtering,DSD provides Wide BW/Narrow BW;PCM provides Short Delay Shar /Short Delay Slow/Sharp/Slow/Low-
• XOMS U8,Support PCM384/DSD256;
• Adjustable screen brightness.If no operation after 30 seconds to restore the default brightness;
• All-aluminum chassis.
• DAC Size: 330(L)* 260(W)* (H) 65MM (without protruding parts);
• Package size: 420 (L) * 360 (W) * 175MM (H);
• With packaging weight: 6.5KG;
• International voltage AC100V-240V;
• Frequency response: 20Hz-20kHz +/- 0.1dB
• Line Output (off-stage): RCA Output Level: 2.0Vrms @ 0dBFS, XLR Output Level: 4.0 Vrms @ 0dBFS
• XLR interface definition: US standard
• Headphone AMP maximum output power:2400mW @ 32Ω
 
Load power:

32Ω  2400mW

64Ω  1230mW

150Ω  530 mW

300Ω 264 mW

600Ω 132 mW


Rigorous design,rational layout,clean workmanship,excellent materials






Analog LPF circuit using Fully discrete circuit  Class-A line.
Fully discrete circuit  Class-A work flexibility. It is free to adjust the parameters of each level.
Technical experience and long debugging process, to achieve the best working condition.


AK4118 receive demodulation - sent to the CPLD for processing;
CPLD programmable logic chip, self-built logic functions of digital integrated circuits, clock management, 2nd PLL digital shaping, DOP demodulation, PCM / DSD depop switch and other exclusive technology;


Fully discrete circuit High Current Pure Class-A Balanced Headphone Amplifier.
Professional team design.
The input stage adopts audio special low-noise tube, full-DC amplification, carefully debug each level work in the best working condition.
The final stage use 4xMedium power tube, Big Output Power, most of the headset to play the best results;


2X50W custom toroidal transformer.Completely independent power supply, do not interfere with each other.For high-quality sound to provide better power supply environment and power;


Multistage filtering and voltage regulation.,To ensure clean and stable power supply;


Relay array,60 files simulation of lossless volume adjustment;


XOMS U8 USB Professional SOUND CARD:
XMOS USB using the latest and highest-level U8 (8 core) USB AUDIO scheme,
PCM highest support 32Bit 384K,
DSD Support DSD64 (2.8224MHz), DSD128 (5.6448MHz), with leading system compatibility:
Compatible includes 32/64-bit Microsoft Windows XP, WindowsVista, Windows7, Windows8, Windows 8.1, Windows 10 and other mainstream Windows systems, supports Apple MacOSsystems, Linux kernel support system, and is compatible with partial support OTGfunction of iOSAndroid smart devices .
USA ACCUSILICON femtosecond crystal;


Full interface supports DSD.
IIS supports DSD64, DSD128, DSD256, DSD512;
USB support DSD64, DSD128, DSD256;
Coaxial / fiber / AES / EBU support DSD64 (DOP mode);
 
 
Frequency response


THD+N



SNR


Headphone amplifier 2-channel each connected 32Ω load,Output power at 2400mW: distortion and waveform.


I2S Pin definition



Questions & Answers

  • Q: I'm using JRiver with XMOS-Stereo-USB-Audio-Class2-Driver-3033_v4.13.0 driver. Can driver automatically switch between 174.4K and 196K when playing back 44.1 and 48K source with JRiver 4X upsampling? It seems to be fixed speed?
  • A: Hi Louie,The driver can't automatically switch between 174.4K and 196K when playing back 44.1 and 48K source with JRiver 4X upsampling. Thank you!
  • Louie 12/12/18 8:51 PM Asked.
  • Q: Many thanks for you answer. Now i have another question. I saw on your site this update: gustart_a20_dfu_Firmware.bin 07-Dec-2018 18:11 It's a new firmware? Shuld i need update? There are a change log for it?
  • A: Hi Frankie, this link is used for the USB firmware upgrade. You don't need to update it, if not necessary. Thank you!
  • Frankie 12/12/18 2:17 PM Asked.
  • Q: Hi, i had my A20h last monday thru the amazon shop, very greet dac, but i have a question. I'm on windows 10 build 1803, if i using the dac as audiocard whit usb out whit native windows driver, "xcore USB Audio 2.0" i can set on property of that driver until 384 Khz, but if i use the "XMOS-Stereo-USB-Audio-Class2-Driver-3033_v4.13.0" (tried 3.34, also) i can only set until 192 Khz. There one reason for that? It's normal? Anyone have had this issue?
  • A: Hi Frankie, It's normal. But if you don't download the driver, the DSD is unavailable.Thank you!
  • Frankie 12/9/18 6:25 PM Asked.
  • Q: Hi, thanks for quick reply and help. I have another question. OK, so im planning to buy A20H, and i have just bought Fostex T50RP MK3 headphones (planar). These will be my starting headphones for A20H, as then later i will be looking for something Audeze, or something like pricey headphones. My question is, i will be using A20H with my DELL E6540 laptop on Windows 7. Is this ampdac A20H compatible with this set-up of hardware? and is this setup suitable (proper) at all? Thanks! Regards
  • A: Hi,It's compatible.Thank you!
  • Luka Hafner 11/24/18 9:24 AM Asked.
  • Q: Hi there! I want to buy something like Gustard A20H, and im looking for Gustard X20U , too. So my question is, i like warm sound. Which one do you recommend for wormer sound, A20H or X20U? As I see, they have different chips. Thanks for your time and answer. Best Regards
  • A: Hi, If you like warm sound, Gustard A20H will be better. But I'm sorry that I can not tell you exactly what the sound quality is, because the device will vary depending on the connected device. Thank you!
  • Luka Hafner 11/23/18 6:00 PM Asked.